Contour integral calculations for generalised creep laws within ABAQUSKIM, Yun-Jae.International journal of pressure vessels and piping. 2001, Vol 78, Num 10, pp 661-666, issn 0308-0161Article

Estimation of fully plastic crack tip stresses from equilibrium of least upper bound circular arcsKIM, Yun-Jae.International journal of mechanical sciences. 2002, Vol 44, Num 5, pp 881-897, issn 0020-7403Article

J and CTOD estimation for homogeneous and bi-material fracture toughness testing specimensKIM, Yun-Jae; LEE, Hyungyil.KSME international journal. 2001, Vol 15, Num 8, pp 1079-1089, issn 1226-4865Article

Interfacial crack-tip constraints and J-integral for bi-materials with plastic hardening mismatchLEE, Hyungyil; KIM, Yun-Jae.International journal of fracture. 2007, Vol 143, Num 3, pp 231-243, issn 0376-9429, 13 p.Article

Relevance of plastic limit loads to reference stress approach for surface cracked cylinder problemsKIM, Yun-Jae; SHIM, Do-Jun.International journal of pressure vessels and piping. 2005, Vol 82, Num 9, pp 687-699, issn 0308-0161, 13 p.Article

Closed-form plastic collapse loads of pipe bends under combined pressure and in-plane bendingKIM, Yun-Jae; OH, Chang-Sik.Engineering fracture mechanics. 2006, Vol 73, Num 11, pp 1437-1454, issn 0013-7944, 18 p.Article

Determination of J-Integral Using the Load-COD Record for Circumferential Through-Wall Cracked PipesHUH, Nam-Su; KIM, Yun-Jae.Journal of pressure vessel technology. 2008, Vol 130, Num 4, issn 0094-9930, 041402.1-041402.7Article

Limit loads for pipe bends under combined pressure and in-plane bending based on finite element limit analysisKIM, Yun-Jae; OH, Chang-Sik.International journal of pressure vessels and piping. 2006, Vol 83, Num 2, pp 148-153, issn 0308-0161, 6 p.Article

On the sensitivity of J estimation to materials' stress-strain curves in fracture toughness testing using the finite element methodKIM, Yun-Jae; SCHWALBE, Karl-Heinz.Journal of testing and evaluation. 2001, Vol 29, Num 1, pp 18-30, issn 0090-3973Article

Effects of attached straight pipes on finite element limit analysis for pipe bendsKIM, Yun-Jae; OH, Chang-Sik.International journal of pressure vessels and piping. 2007, Vol 84, Num 3, pp 177-184, issn 0308-0161, 8 p.Article

Finite element limit analyses of under-matched tensile specimensKIM, Yun-Jae; OH, Chang-Sik.Engineering fracture mechanics. 2006, Vol 73, Num 10, pp 1362-1378, issn 0013-7944, 17 p.Article

Reference stress approximations for J and COD of circumferential through-wall cracked pipesKIM, Yun-Jae; BUDDEN, Peter J.International journal of fracture. 2002, Vol 116, Num 3, pp 195-218, issn 0376-9429Article

Elastic stress intensity factors and crack opening displacements for circumferential through-walled cracked elbowsAN, Joong-Hyok; KIM, Yun-Jae; BUDDEN, Peter J et al.Engineering fracture mechanics. 2010, Vol 77, Num 14, pp 2821-2839, issn 0013-7944, 19 p.Article

Finite element plastic loads for circumferential cracked pipe bends under in-plane bendingKIM, Yun-Jae; KIM, Young-Il; SONG, Tae-Kwang et al.Engineering fracture mechanics. 2007, Vol 74, Num 5, pp 643-668, issn 0013-7944, 26 p.Article

Reference stress based approach to predict failure strength of pipes with local wall thinning under combined loadingSHIM, Do-Jun; KIM, Young-Jin; KIM, Yun-Jae et al.Journal of pressure vessel technology. 2005, Vol 127, Num 1, pp 76-83, issn 0094-9930, 8 p.Article

Plastic limit loads for cracked large bore branch junctionMYEONG, Man-Sik; KIM, Yun-Jae; BUDDEN, P. J et al.Engineering fracture mechanics. 2011, Vol 78, Num 11, pp 2298-2309, issn 0013-7944, 12 p.Article

Effects of local wall thinning on net-section limit loads for pipes under combined pressure and bendingOH, Chang-Kyun; KIM, Yun-Jae; PARK, Chi-Yong et al.Nuclear engineering and design. 2009, Vol 239, Num 2, pp 261-273, issn 0029-5493, 13 p.Article

Limit pressures of 90° elbows with circumferential surface cracksHONG, Seok-Pyo; KIM, Jong-Hyun; KIM, Yun-Jae et al.Engineering fracture mechanics. 2009, Vol 76, Num 14, pp 2202-2216, issn 0013-7944, 15 p.Article

Limit load solutions for pipes with Through-Wall crack under single and combined loading based on finite element analysesHUH, Nam-Su; KIM, Yun-Jae; KIM, Young-Jin et al.Journal of pressure vessel technology. 2007, Vol 129, Num 3, pp 468-473, issn 0094-9930, 6 p.Article

Influence of Ramberg-Osgood fitting on the determination of plastic displacement rates in creep crack growth testingHUH, Nam-Su; KIM, Yun-Jae; YOON, Kee-Bong et al.Fatigue & fracture of engineering materials & structures (Print). 2007, Vol 30, Num 4, pp 277-286, issn 8756-758X, 10 p.Article

Limit loads for thin-walled piping branch junctions under internal pressure and in-plane bendingKIM, Yun-Jae; LEE, Kuk-Hee; PARK, Chi-Yong et al.International journal of pressure vessels and piping. 2006, Vol 83, Num 9, pp 645-653, issn 0308-0161, 9 p.Article

Crack opening analysis of complex cracked pipesKIM, Yun-Jae; HUH, Nam-Su; KIM, Young-Jin et al.International journal of fracture. 2001, Vol 111, Num 1, pp 71-86, issn 0376-9429Article

A method to predict failure pressures of steam generator tubes with multiple through-wall cracksKIM, Nak-Hyun; OH, Chang-Sik; KIM, Yun-Jae et al.Engineering fracture mechanics. 2010, Vol 77, Num 5, pp 842-855, issn 0013-7944, 14 p.Article

Effect of reinforcement on plastic limit loads of branch junctionsKIM, Yun-Jae; MYEONG, Man-Sik; YOON, Kee-Bong et al.International journal of pressure vessels and piping. 2009, Vol 86, Num 8, pp 508-516, issn 0308-0161, 9 p.Article

Plastic loads of pipe bends under combined pressure and out-of-plane bendingLEE, Kuk-Hee; KIM, Yun-Jae; PARK, Chi-Yong et al.International journal of fracture. 2008, Vol 149, Num 1, pp 31-45, issn 0376-9429, 15 p.Article